Tile Restore - Acid Cleaner

$34.90

A restorative acidic cleaner for ceramic or porcelain tile and grout, masonry, and concrete.  This is a safer alternative than phosphoric or muratic acids. Removes grout haze, hard water deposits, soap scum, rust spots and efflorescence. Contains no harsh fumes and is low foaming.    

 

Ready to use pH is 1.0 (16:1 Dilution)

Dilution Ratio
Tile Cleaner/Water    Tile Restore:Water

Heavy          128 oz/Gallon              1:1
Medium         32 oz/Gallon              1:4
Light               8 oz/Gallon              1:16

 

Tile Restore will etch marble, limestone, and other acid sensitive materials (ie metals and frosted glass). Do not overspray on surfaces not to be cleaned. If overspray occurs, rinse thoroughly.

Always test to determine desired results in an inconspicuous area before using. 
Remove loose debris by sweeping or vacuuming. Mix above solution well and apply to surface with mop, sponge, or sprayer. Allow to dwell for 5 minutes, agitate with a scrub brush, and rinse and extract thoroughly. Do not allow product to dry on surface as this may make removal difficult. Rinse equipment after use.

For best results rinse with Tile Neutral Clean & Rinse. Reseal cleaned area with Tile Aqua or Tile Ultimate sealers.