Tile Aqua - Water-based Sealer
A water-based stone, tile and grout sealer, which maintains the natural look of granite. Tile Aqua has excellent oil and water repellency and is safe for indoor and outdoor use. Deepens certain natural stone such as travertine and slate. Resists soil, stain, chemical degradation, biological growth and efflorescence. Reduces cracking, spalling, and freeze/thaw damage.
Ready to use pH is 8.75
Always test to determine desired results and ease of application in an inconspicuous area with a 24 hour cure time before using. Ensure that surface is clean, dry (or just slightly damp), free of coatings, and allow new grout installations to cure for 72 hours. Mask off baseboards and adjacent areas. Do not overspray on surfaces not to be cleaned. If overspray occurs, rinse thoroughly.
Tile Aqua is ready to use. Liberally apply to surface with sprayer, roller, sponge, or mop. Spread evenly with a squeegee, sponge, or mop. Coverage is approximately 200 - 1000 square feet per gallon depending upon porosity of stone. For more porous stones, a second coat may be required. Wait a minimum of 30 minutes before second application. After final application, wipe up any excess with clean towel, sponge, or mop. Do not allow foot traffic for 6-8 hours. Allow 72 hours curing time for maximum protection. Rinse equipment thoroughly with water. Protect chemical from freezing.