0 Items

Fury High pH Prespray

$ 18.99

Fury is a fast acting, high pH traffic lane prespray, designed to quickly suspend and emulsify the most difficult soils & grease conditions. Fury’s cutting edge combination of high performance alkaline builders and surfactants deliver outstanding results in the most challenging situations. Ideal prespray for apartments and synthetic commercial carpets.

  • High alkaline pH power
  • Quickly emulsifies stubborn soils and greases
  • VOC compliant
  • Available in: 4 L (1.06 US gal.), 20 L (5.28 US gal.), 205 L (54.1 US gal.)
HIGH POWERED PRESPRAY FOR SEVERELY SOILED CARPETS

Diluted pH: 11.7 Dilution Ratio: 1:8

DIRECTIONS FOR USE:

Pretest in an inconspicuous location for color fastness and fibre stability.

Pump-up or Power Sprayer: Mix 16 oz (472.5 ml) of Fury into 1 gal (3.78 L) of warm to hot water (Dilution 1:8).

Hydro-ForceTM Sprayer:
4:1 Dilution (No Tip): Mix 64 oz (1.89 L) of Fury into a Hydro-ForceTM jug and fill with warm to hot water.

8:1 Dilution (Yellow Tip): Do not dilute, fill HydroforceTM jug with Fury.

For best results: Pile lift or vacuum carpet prior to cleaning. Spray diluted Fury pre-conditioner onto carpet at the rate of 800-1000 square feet per gallon (3.78 L). Agitate presprayed area using a carpet groomer. Allow 15 minutes dwell time, then rinse with Esteam Fibre Rinse solution in conjunction with hot water extraction.

NOTE: Do not mix Esteam Fury with any other product.

CAUTION: Fury is not designed for use on 5th generation fibres.